在生态文明建设背景下，落实习近平总书记“绿水青山就是金山银山”理念，探索基于生态银行模式下的生态资源价值的实现对乡村振兴事业的发展至关重要。本文对已有生态资源价值转化模式和实践，即生态资产产权交易模式、生态产业实践模式、多元化产品价值实现模式、生态补偿实践模式进行梳理，分析归纳四种模式存在的政府资金缺口大、金融属性不强和投资经营积极性不高的问题。在此基础上，设计出新时期创新性生态银行模式下的生态资源价值转化新路径。该模式可以带动生态资源价值转化及乡村振兴事业的发展，为乡村地区带来生态效益和经济效益。

Abstract: Sand fences made of punched steel plate (PSP) have recently been applied to control wind-blown sand in desertified and Gobi areas due to their strong wind resistance and convenient in situ construction. However, few studies have assessed the protective effect of PSP sand fences, especially through field observations. This study analyzes the effects of double-row PSP sand fences on wind and sand resistance using field observations and a computational fluid dynamics (CFD) numerical simulation. The results of field observations showed that the average windproof efficiencies of the first-row and second-row sand fences were 79.8% and 70.8%, respectively. Moreover, the average windproof efficiencies of the numerical simulation behind the first-row and second-row sand fences were 89.8% and 81.1%, respectively. The sand-resistance efficiency of the double-row PSP sand fences was 65.4%. Sand deposition occurred close to the first-row sand fence; however, there was relatively little sand on the leeward side of the second-row sand fence. The length of sand accumulation near PSP sand fences obtained by numerical simulation was basically consistent with that through field observations, indicating that field observations combined with numerical simulation can provide insight into the complex wind-blown sand field over PSP sand fences. This study indicates that the protection efficiency of the double-row PSP sand fences is sufficient for effective control of sand hazards associated with extremely strong wind in the Gobi areas. The output of this work is expected to improve the future application of PSP sand fences.

Abstract: During aeolian processes, the two most critical factors related to dust emissions are soil particle and aggregate saltation, which greatly affect the vertical profiles of near-surface dust concentrations. In this study, we measured PM10 concentrations at four different heights (0.10, 0.50, 1.00 and 2.00 m) with and without continuous and simultaneous aeolian saltation processes on a Gobi surface in northwestern China from 31 March to 10 April, 2017. We found that the vertical concentration profiles of suspended PM10 matched the log-law model well when there was no aeolian saltation. For the erosion process with saltation, we divided the vertical concentration profiles of PM10 into the saltation-affected layer and the airflow-transport layer according to two different dust sources (i.e., locally emitted PM10 and upwind transported PM10). The transition height between the saltation-affected layer and the airflow-transport layer was not fixed and varied with saltation intensity. From this new perspective, we calculated the airflow-transport layer and the dust emission rate at different times during a wind erosion event occurred on 5 April 2017. We found that dust emissions during wind erosion are primarily controlled by saltation intensity, contributing little to PM10 concentrations above the ground surface compared to PM10 concentrations transported from upwind directions. As erosion progresses, the surface supply of erodible grains is the most crucial factor for saltation intensity. When there was a sufficient amount of erodible grains, there was a significant correlation among the friction velocity, saltation intensity and dust emission rate. However, when supply is limited by factors such as surface renewal or an increase in soil moisture, the friction velocity will not necessarily correlate with the other two factors. Therefore, for the Gobi surface, compared to limiting dust emissions from upwind directions, restricting the transport of suspended dust in its path is by far a more efficient and realistic option for small areas that are often exposed to dust storms. This study provides some theoretical basis for correctly estimating PM10 concentrations in the Gobi areas.

Abstract: Dust emission and wind erosion are widespread phenomena in arid and semi-arid regions, which have far-reaching harmful effects to the environment. This study aimed to use microbial induced carbonate precipitation (MICP) method with Bacillus sphaericus to reduce soil losses that occur in a dust-producing area due to wind erosion in the Ilam Province, Iran. Soil samples at the 0–30 cm depth were used and sterilized in an autoclave for 2 h at 121°C and 103 kPa. Approximately 3 kg soils were weighed and poured in the 35 cm×35 cm×3 cm trays. Different treatments included two levels of B. sphaericus (0.0 and 0.5 OD), three levels of suspension volume (123, 264, and 369 mL), two levels of urea-chloride cementation solution (0.0 and 0.5 M), and two levels of bacterial spray (once and twice spray). After 28 d, soil properties such as soil mass loss, penetration resistance, and aggregate stability were measured. The results showed a low soil mass loss (1 g) in F14 formulation (twice bacterial spray+264 mL suspension volume+without cementation solution) and a high soil mass loss (246 g) in F5 formulation (without bacteria+264 mL suspension volume+0.5 M cementation solution). The highest (42.55%) and the lowest (19.47%) aggregate stabilities were observed in F16 and F7 formulations, respectively, and the highest penetration resistance (3.328 kg/cm2) was observed in F18 formulation. According to the final results, we recommended the formulation with twice bacterial spray, 0.5 M cementation solution, and 269 mL suspension volume as the best combination for soil surface stabilization. Furthermore, this method is environmentally friendly because it has no adverse effects on soil, water, and plants, thus, it would be an efficient approach to stabilize soil surface.